Vaxis Storm 800 3G-SDI & HDMI Wireless Transmission Kit
● Full HD 1080p,no compression, zero delay.
● Transmission 800ft.
● 10 channels
● Channel Scanner workable
● LED screen
● USB upgrade
● TX: SDI In x1&SDI loop out & HDMI In x1.
● RX: SDI Out x1, HDMI Out x1.
●Built In HDMI/SDI Converter
● Support metadata, timecode, and time trigger.
● Sony NPF mount on TX, V/AB mount on RX
The Vaxis Storm 800 is an entry-level wireless transmission system featuring an 800' range. It supports up to 1080p60 uncompressed signal transmission with less than 1 ms of latency over the 5.1 to 5.9 GHz license-free operation frequency. The transmitter features 3G-SDI and HDMI inputs plus a 3G-SDI loop output for local monitoring, and it comes with an L-series battery plate. The receiver offers 3G-SDI and HDMI outputs and has a V-mount plate. Both units also support continuous power via 2-pin LEMO power inputs. Two D-Tap to LEMO cables are included for running power from D-Tap sources.
Both units have an OLED screen that confirms various parameters. The transmitter is capable of multicasting to up to 10 receivers at the same time. The Storm 800 system accepts and transmits camera timecode, metadata, and start/stop flags for ARRI, Canon, RED, Panasonic, and Sony cameras. It also has a built-in HDMI to SDI converter. Both units feature a robust metal housing.
|Maximum Outdoor LOS range||250m|
|Transmission Delay||0 [<1msec]|
|Radio Frequency||20MHz or 40MHz|
|Channel Selection||[Manual selection]|
|Supports distance measurements,link quality and battery status.|
|Camera Unit||Monitor Unit|
|Video Interface||SDI IN*1,SDI OUT*1,HDMI IN*1||SDI OUT*2,HDMI IN*1|
|Power Connector||Lemo input,Sony FP-970||Lemo input,V-Iock,AB-lock|
|Weight||240 grams||355 grams|
● 1* TX with Sony NPF battery plate
● 1* RX with V-mount / Gold mount battery
● 3* blade antennas
● 2* D-tap cable
● 1* SDI cable
● 1* magic arm
● 1* flight case