The DSMC2™ V-Lock Battery Module is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK and third-party batteries. The V-Lock and protected release button ensure ongoing power even during mobile shoots.
The DSMC2™ V-Lock Battery Module is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK and third-party batteries. The V-Lock and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module also offers a P-Tap connector for powering peripherals and accessories. Located on the top of the module, the P-Tap connector supports a maximum current of 3.0 Amps.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. The DSMC2 V-Lock Battery Module is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the DSMC2 V-Lock Battery Module directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
Technical Specifications:
| DIMENSIONS | Height: 4.57 in. (116.0 mm) Width: 3.71 in. (94.3 mm) Depth: 1.42 in. (36.0 mm) |
| WEIGHT | 0.79 lbs (356 g) |
| MATERIAL | Aluminum Alloy |
| BRAIN MOUNTING | 4x M4 captive mounting screws |
| BRAIN CONNECTIONS | Power delivery via rear pogo connector (13-Pin) |
| CONNECTORS | P-Tap Aux Power output (2-Pin), 3.0A |
| BATTERY COMPATIBILITY | RED BRICK and other standard V-Lock batteries |
| OPERATING TEMPERATURE | 0°C to 40°C (32°F to 104°F) |
| STORAGE TEMPERATURE | –20°C to 50°C (–4°F to 122°F) |
| OPERATING HUMIDITY | 0% to 85%, non-condensing |
| STORAGE HUMIDITY | 0% to 85%, non-condensing |
| FIRMWARE REQUIREMENT | Compatible with all DSMC2 firmware v6.2 or later |
| Brand | RED |
|---|---|
| Pickup only | N/A |
| Kits Choice - N8 | N/A |
| Hire Length | 24hr |