The DSMC2® Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output.
The DSMC2® Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.
The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
The DSMC2 Jetpack Expander is also available, featuring an HDMI output and USB support for many aerial configurations.
NOTE: Only one (1) expander module can be used at a time.
DSMC2 Jetpack-SDI Expander
|DIMENSIONS||Height: 4.57 in. (116 mm)
Width: 3.54 in. (90 mm)
Depth: 1.46 in. (37 mm)
|WEIGHT||0.56 lbs (253.6 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via WEAPON Rear pogo connector (13-Pin)
Communication via WEAPON Rear I/O connector (4×40 Pin)
|CONNECTORS||DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
Gigabit Ethernet input/output (9-Pin 0B LEMO)
Aux Power Output (2-Pin 0B LEMO), 1.5 A
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
|AUTO BOOT ON POWER||2-position slider switch|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v6.3 or later|
|Kits Choice - N8||N/A|