LightPro LP-BP 230NE 230wh Li-ion V-Lock / VLock Battery with 5v USB
- V-Mount 230WH Li-ion battery for professional cameras
- No memory effect
- 4 level LED power indicator
- Intelligent control and protection circuit
- Temperature, current and voltage protection
- D-Tap power connector
- USB 5 V Output
If you want to make your LED panel or camera more portable, this is a great addition to any kit. The battery features a D-tap connection on the side which has an output of 14.8V so that you can power external units. Please be aware that if you want to power a light, it will need to be able to run 15V at least.
The LightPro 230wH V-lock battery is one of the largest capacity v-lock batteries we have, if you are thinking about flying with it, you are not allowed to.
Whilst working on lights, the V-Mount 230WH Li ion battery is designed to be used for professional cameras as well.
No memory effect - in the past if you recharged a battery when it hadn't been fully drained, you would lose the amount of future charge. This no memory effect feature means that this is no longer the case.
There is a 4 level LED power indicator on the side of the battery unit which allows you to check the power left in the battery.
And finally, if you want a USB output to charge and power a USB LED light like that of the RECTA and QUADRA series, or if you just want to charge your phone, the LightPro battery range will give you this ability too.
- Voltage : 14.8 V
- Full voltage : 17 V
- Cutoff voltage : 11 V
- Capacity : 230 Wh
- Power limit : 100 W
- Dimensions excluding mount : 102 x 152 x 63 mm (4.02 x 5.98 x 2.48 in)
- Weight approx : 1500 g (3.31 lbs)
- Mount type : V-Lock (V-Mount)
- USB Output : 5 V
- D-Tap Connector
|Voltage/Capacity||Max. Output||Max.Output Current||Typical Run-Time||Weight||Dimension|
|14.8V / 15.6Ah||150W||12A||138mins a 100W||1320g||172(L)x102(W)x47(T)mm
*Charger not included