LightPro LP-BP 130NE 130wh Li-ion V-Lock / VLock Battery with 5v USB
Features:
- V-Mount 130WH Li-ion battery for professional cameras
- No memory effect
- 4 level LED power indicator
- Intelligent control and protection circuit
- Temperature, current and voltage protection
- D-Tap power connector
- USB 5 V Output
If you want to make your LED panel or camera more portable, this is a great addition to any kit. The battery features a D-tap connection on the side which has an output of 14.8V so that you can power external units. Please be aware that if you want to power a light, it will need to be able to run 15V at least.
The LightPro 130wH V-lock battery has a capacity of 130wH, which means that whilst it is over the 100wh limit we usually state is safe to fly with, you can take 2 of these on most flights (it is best to check with your airline).
Whilst working on lights, the V-Mount 130WH Li ion battery is designed to be used for professional cameras as well.
No memory effect - in the past if you recharged a battery when it hadn't been fully drained, you would lose the amount of future charge. This no memory effect feature means that this is no longer the case.
There is a 4 level LED power indicator on the side of the battery unit which allows you to check the power left in the battery.
And finally, if you want a USB output to charge and power a USB LED light like that of the RECTA and QUADRA series, or if you just want to charge your phone, the LightPro battery range will give you this ability too.
- V-Mount 130WH Li-ion battery for professional cameras
- No memory effect
- 4 level LED power indicator
- Intelligent control and protection circuit
- Temperature, current and voltage protection
- D-Tap power connector
- USB 5 V Output
| Voltage/Capacity | Max. Output | Max.Output Current | Typical Run-Time | Weight | Dimension |
| 148V / 8.8Ah | 79W | 6.5A | 222mins at 35W | 1050g | 172(L)x102(W)x47(T)mm |
*Charger not included