DJI Ronin-S Gimbal Three-Axis Motorised Gimbal

  • Advanced 32-bit ARM processor
  • DJI specialized gimbal drive motors with encoders
  • Support for 2.4/5.8 GHz receivers
  • Support for D-Bus receiver
  • Support for extended GPS
  • 360° continuous rotation through slip ring
  • Three profile settings, including SmoothTrack and joystick parameters
  • Support for virtual joystick operation
  • Support for time-lapse, track, and panorama
  • Sport mode support
  • Roll 360° rotation support
  • Three-Axis Motorized Gimbal Stabilizer
  • Holds DSLR or Mirrorless Cameras
  • Eight-Pound Payload Capacity
  • Trigger and Mode Buttons for Control
  • Offset Roll Motor for Screen Visibility
  • One-Handed Operation
  • Battery Grip Lasts up to 12 Hours
  • Camera Control via Included Cables
  • Includes Focus Wheel
  • Additional Functions via Android/iOS App

In stock

The DJI Ronin S handheld gimbal has been created to take your production to new cinematic heights with an innovative design that holds the camera above the rear motor for an unimpeded view of the LCD screen. Designed to support both mirrorless and DSLR cameras, the Ronin-S uses high-torque motors to keep your shot steady, even when shooting with heavier gear. Dedicated controls allow you to switch between two customisable modes and a highly responsive sports mode. The gimbal supports a dual-handheld bar, a focus command unit, and can even be removed from the handle and mounted on a range of other film making tools like sliders, jibs, and RC buggies for complete creative freedom.

Three Axis Stabiliser and Offset Roll Motor

With cutting edge high-torque motors that deliver incredibly steady three axis stabilisation, the Ronin-S Gimbal allows for the capture of professional, highly controlled cinematic footage. Using an innovative design that positions the camera above the roll axis arm of the gimbal, a clear view of the rear LCD screen is possible, so you can track your shot perfectly. This also allows you to transition smoothly between upright and underslung positions in one take.

Push to Adjust, Axis Lock and Sport Mode

An all-new push mode allows for hand adjustment of the pan and tilt axis while the axis lock mode helps to achieve a faster setup time. For tracking faster moving subject the Ronin S features a sport mode that increases the responsiveness of the gimbal for quicker panning and following, perfect for run-and-gun operators who prefer to shoot in the middle of the action.

Customisable SmoothTrack Settings

DJI’s SmoothTrack technology keeps camera movements steady and can be adjusted for refined motor performance. The gimbal also provides the ability to customise and store your favourite settings in two groups that can be toggled with the press of a button, allowing you to adapt to your environment and change the way the gimbal responds to your movements.

Built for Professionals

The Ronin S has been designed for videographers and cinematographers who need a reliable camera rig that can be used comfortably for as long as it takes to get the shot. In addition to the long battery life the battery can be hot swapped for theoretically limitless shooting times. The gimbal also features a joystick for framing control as well as an integrated start/stop recording button.

Mobile App with Intelligent Shooting Modes

Built-in connectivity for smart devices allows you to access several intelligent modes like Panorama, Track and Hyperlapse with the DJI Ronin mobile app. It also unlocks the CamAnchor function that lets you designate camera positions that can be toggled between in real time during a take. The app also allows you to make refined adjustments to the responsiveness and speed of each of the gimbal’s motors.

Supports Focus Control and a Dual Handle

A dedicated accessory dock on the side allows a dedicated DJI focus command unit to be mounted to the 3-axis gimbal, for smooth manual focus pulls and transitions. The Ronin S also works with a range of other DJI accessories like the dual handed grip that provides enhanced weight distribution and more comfortable shooting without sacrificing control, or the camera focus or shutter triggering ability.

Versatile Mounting Options and Accessories

The DJI Ronin-S Gimbal has been carefully designed to be an incredibly versatile tool for cinematographers and directors who want to push their creative boundaries. It can also be mounted to a remote-controlled buggy for low-perspective shots and mounted on a jib for stabilised crane shots. The stabiliser also includes several accessory mounting ports that can be used to attach LED lights, wireless video transmitters, monitors and other accessories


Camera Tray Dimensions
  • Maximum depth from the center of gravity on the camera base plate: 98 mm
  • Maximum height measured from top of the camera base plate: 150 mm
  • Maximum width: 205 mm
Accessory Port
  • Mechanical: 1/4”-20, 3/8”-16 Mounting Hole, M4 Mounting Hole
  • Electrical: 12V/2A Power Accessory Port, Camera Control Port, 8-pin Port
Input Power
  • Model: RB1-2400mAh-14.4V
  • Type: 18650 LiPo
  • Capacity: 2400 mAh
  • Energy: 34.56 Wh
  • Bluetooth 4,9
  • USB-C
DJI Assistant 2 Requirements
  • Windows 7 or above
  • Mac OS X 10.11 or above
Ronin App Requirements
  • iOS 9.0 or above
  • Android 4.4 or above

Mechanical & Electrical Characteristics

Working Current ≈Static current: 0.16A
Bluetooth Operating Frequency 2.4 to 2.48 GHz
Bluetooth Transmitter Power 0 dBm
Operating Temperature -4° to 113° F (-20°C to 45°C)
Weight Approx. 3.3 lb(gimbal only), Approx. 4.1 lb (gimbal and grip included)
Dimensions Approx. 202×185×486 mm

Working Performance

Load Weight (Reference Value) 3.6 kg (Handheld)
Angular Vibration Range ±0.02°
Maximum Controlled Rotation Speed
  • Pan axis: 360°/s
  • Tilt axis: 360°/s
  • Roll axis: 360°/s
Mechanical Endpoint Range
  • Pan axis: 360° continuous rotation
  • Tilt axis: +185° to -95°
  • Roll axis: 360° continuous rotation
Controlled Rotation Range
  • Pan axis: 360° continuous rotation
  • Tilt axis: +135° to -90° (Upright Mode), +90° to -135° (Underslung and Flashlight Mode)
  • Roll axis: ±30°, 360° continuous rotation (Roll 360 mode)

The DJI Ronin-S is more than just a miniaturized version of the larger Ronin gimbal stabilizers; it represents a scalable ecosystem for integrating DSLR and mirrorless cameras into professional-grade workflows. The single-handed form factor of the Ronin-S lends itself to lighter cameras. But don't let its size fool you; the Ronin-S has a lot going on under the hood. Separate modules are available for the handle and accessory docks, allowing you to customize the gimbal based on how you wish to operate it.

Offset Roll Motor

By offsetting the roll motor, the Ronin-S holds the camera above the roll axis, leaving the camera's LCD screen unblocked. This design also minimizes the camera shake that occurs when transitioning from upright to underslung modes and vice versa.


Customize the response of the Ronin-S to fit your shooting style. Two response types can be saved and instantly recalled with a single click. Go from smooth camera movement to rapid response with the flick of a switch to be ready for any kind of shooting situation.

Modular Design

The Ronin-S was built to be modular. Direct-connected and wireless accessories are supported. For example, separately available DJI control devices, such as the Master Wheels and Master Force, enhance the usability of the Ronin-S in professional scenarios.


The Ronin-S can mount to an RC buggy for low angle shots or even act as a stabilized remote head when mounted to a jib. The DJI Focus Command Unit can be mounted to the accessory dock, enabling creators to pull focus when operating with the standard handle. You can also attach the Ronin-S to a dual-handheld bar without compromising control of the gimbal, focus, or the camera shutter.


Multiple accessory mounts are allocated on the Ronin-S, providing full support for add-ons such as a microphone, LED lights, and even a wireless video transmitter. Compatibility with DJI control devices such as Master Force provides intuitive controls. The Master Wheels are also able to provide remote operators precise gimbal movements.

Additional Features

  • Advanced 32-bit ARM processor
  • DJI specialized gimbal drive motors with encoders
  • Support for 2.4/5.8 GHz receivers
  • Support for D-Bus receiver
  • Support for extended GPS
  • 360° continuous rotation through slip ring
  • Three profile settings, including SmoothTrack and joystick parameters
  • Support for virtual joystick operation
  • Support for time-lapse, track, and panorama
  • Sport mode support
  • Roll 360° rotation support
  • Quick record function
Write Your Own Review
You're reviewing:DJI Ronin-S Gimbal Three-Axis Motorised Gimbal
DJI Ronin-S
BG37 Grip with Built-In Battery
Camera Mounting Plate
Focus Wheel
RSS IR Control Cable
USB-C Camera Control Cable
USB Type-B Camera Control Cable
USB Type-C Cable
Lens Support
Camera Riser
Extended Grip/Tripod
24W USB Power Supply
Accessory Box
Hex Key
Touch Fastener Strap for Cable
Touch Fastener Strap for Gimbal
Storage Case